Last Updated: August 17, 2026
Quick Answer
After more than 2,000 km, the Acedeck N1 Nomad Violet is still one of my favourite carving boards. The DKP trucks and 125mm MAD MAX wheels give it a lively, connected ride with excellent real-world range.
The main downside is long-term wheel durability. At around 2,000 km, my MAD MAX wheels began separating around the core, and Acedeck advised me to replace them. I still love how the board rides, but buyers should inspect these wheels regularly and factor replacement cost into ownership.
A Board That Was Worth the Wait
There’s a moment every rider knows.
A new board arrives.
The box sits on the floor.
Still sealed.
Inside is a machine that might quietly change how you spend your evenings, your weekends — maybe even the way you move through your city on your way to work.
Even after more than 10,000 kilometres of riding, that moment still feels the same to me. There’s curiosity, a little excitement, and that familiar question in the back of your mind:
What kind of rides are waiting inside this thing?
That was a few months ago. The board was the Acedeck N1 Nomad Violet.
Now I have put more than 2,000 kilometres on it.
This is what I learned.
The Boards That Led Me Here

Every rider has a story of boards.
Mine started with the WowGo 2S — a simple hub-motor board with standard urethane wheels. I rode that board for nearly two years. That’s where I learned everything: balance, carving, and the strange realization that your city suddenly becomes rideable terrain.
After that came an Ownboard Zeus, which introduced me to belt drive systems and larger wheels. I ran Cloudwheels for a while, and they felt like a major upgrade in comfort.
Next came the Shaboardz Summit V3 — my first real experience with double kingpin trucks. That board taught me something about myself: I’m a carver at heart.
Then came the first Acedeck N1 Nomad, which became my primary ride for thousands of kilometres on pneumatic tires. I wrote about that board in detail here.
👉 Acedeck N1 Nomad Long-Term Review
And now: a second Nomad. The Violet edition. DKP trucks. 125mm MAD MAX wheels.
This is where the story gets interesting.
Why I Went Back to Urethane

After years on pneumatics, I missed something.
Pneumatic tires are fantastic for comfort and safety — especially on rough pavement. But urethane has a certain energy to it. The connection between the board and the road is more direct. Carving feels sharper, more alive.
I wanted that feeling back.
The 125mm MAD MAX wheels on the Violet caught my attention for a specific reason: they’re designed to sit somewhere between urethane and pneumatic. Not traditional small urethane wheels. Not full pneumatics. A middle ground.
In theory:
- More comfort and stability than smaller urethane wheels
- More road feel and carving response than pneumatics
- A hybrid ride that handles rough pavement without losing that lively, connected feel
After more than 2,000 kilometres, I can tell you whether that promise holds up.
Out of the Box: First Impressions


Even before the first ride, a few things stood out immediately.
The board feels solid. Heavier and more substantial than some of the earlier boards I’ve owned.
The double kingpin trucks were noticeable right away. My previous Nomad used TKP trucks. These feel different just picking the board up.
The battery enclosure and machining are clean. Tight assembly, no obvious gaps or rough finishing.
The MAD MAX wheels look bigger in person than in photos. At 125mm they’re significantly larger than typical urethane wheels but still much smaller than pneumatics.
And then there’s the look. The black deck with the purple star grip tape cutouts.
I’ll just say it: I love the look of this board.
Acedeck N1 Nomad Violet vs. Standard N1: What Actually Changed

This isn’t my first Nomad, so I had a real baseline to compare against.
The key differences in the Violet edition:
- A different battery cell configuration (same capacity, different cells)
- Double kingpin trucks instead of TKP
- 125mm MAD MAX wheels
- A new visual finish
On paper some of these sound minor. But truck geometry and wheel design completely change how a board feels once the wheels start turning.
Now they have.
What 2,000 km Actually Taught Me
This is the part the unboxing couldn’t tell you.
Watch the N1 Nomad Violet in Action
Specs and unboxing photos can only tell you so much. After hundreds of kilometres on this board, the biggest surprise has been how different it feels compared to my previous Nomad. The DKP trucks and MAD MAX wheels completely change the personality of the ride.
The DKP Trucks: Built for Carvers
If you ride for the carve — if turns are the point, not just the obstacle — these trucks are going to make you happy.
Double kingpin geometry gives you more lean response and more fluidity through corners. The board wants to carve. It rewards input. Sweeping through a turn or threading a winding path feels genuinely satisfying in a way TKP trucks don’t quite match.
This is exactly why I bought this board. And in that regard, it delivers.
The Honest Truth About Speed Wobbles
Here’s something I want to be straight with you about.
At higher speeds — real speed, not casual cruising — I hit some wobbles. Nothing I couldn’t ride out. I was fine. But it got my attention.
DKP trucks are inherently more reactive than TKP. That same responsiveness that makes them great for carving means they require more active input from you at speed. If you’re used to TKP geometry and you open up the throttle on a long straightaway, you may notice this.
This isn’t a flaw in the board. It’s a characteristic of the truck geometry — and it’s mostly on the rider. Speed management on a DKP board is a skill, and I’m still calibrating mine.
If your riding is primarily fast straightaways, that’s worth knowing before you buy.
The MAD MAX Wheels: The Verdict
The short answer: they deliver on the promise.
After more than 2,000 kilometres across the mixed-surface paths I ride regularly in Ottawa and Gatineau, I can say these wheels genuinely sit between urethane and pneumatic.
You get more comfort than small urethane wheels. You give up some of the rough-road cushion of pneumatics — but you gain that direct, lively feel I’d been missing. The carving response is there. The connection to the road is there.
One small observation: I sit a little lower to the ground than I did on my pneumatic setup. That’s just a ride-height adjustment after years on a taller configuration (180 mm pneumatics). Not a complaint — just something to know if you’re making a similar switch.
UPDATE — 900km In: I Switched to Pneumatics (and Range Took a Real Hit)
A quick note for anyone trying to decide on wheel options for this board.
Around the 800km mark, I busted a belt. While I waited on the right-size replacements to arrive, I swapped the 125mm MAD MAX wheels for the 180mm pneumatic tires from my original N1 so that I could keep riding.
So for the past week I’ve been running pneumatics for the first time on this board — and the range difference has really surprised me.
I expected a drop. Pneumatics carry more rolling resistance, so a hit was always coming. But the difference is bigger than I thought it would be: on the same routes I ride every week, the MAD MAX wheels give me at least a quarter more range than the pneumatics — and honestly, probably more than that. That’s a real difference when you’re planning a longer ride and need the extra range.
To be clear about where I land: this was a forced swap, not a preference. I still like the feel of the MAD MAX wheels more — that direct, carvy connection is why I bought the N1 Nomad Violet in the first place. The pneumatics are a fine fallback, but the moment my belts arrive, the MAD MAX wheels are going back on.
If range is the number that decides your ride, that’s worth knowing before you start swapping wheels.
The Long-Term Durability of the MAD MAX Wheels (2,000 KM Update)
After putting around 2,000 kilometres on the 125mm MAD MAX wheels — belts fixed, wheels back on, months of riding later — I’ve found one important downside.
The wheel core has started separating from the outer wheel material.
I contacted Acedeck about it, and their advice was clear: the wheels are no longer safe to use and should be replaced.
That’s something I think anyone considering these wheels should know.
I’ve spent years riding pneumatic tires, so I have a good basis for comparison here. Pneumatic setups aren’t maintenance-free — tires eventually wear out and need to be replaced — but the tire itself is the wear component. You don’t necessarily have to replace the entire wheel when the rubber reaches the end of its useful life.
With the MAD MAX wheels, the wheel and outer riding surface are essentially one component. When the wheel itself develops a structural problem like the separation I’m seeing, the entire wheel needs to be replaced.
That doesn’t change how much I like the way these wheels ride. I still prefer their direct, lively feel and the extra range they give me compared with my pneumatic setup. But it does change the long-term ownership equation.
If you’re considering the 125mm MAD MAX wheels, I’d treat them as a component that needs periodic inspection as the kilometres add up. Pay particular attention to the area where the outer wheel material meets the core, and don’t assume visible separation is simply cosmetic.
My experience at 2,000 kilometres doesn’t mean every set will have the same lifespan, but it’s enough that I think wheel durability and replacement cost are worth factoring into the decision — especially if you’re comparing these wheels with a pneumatic setup.
So, what am I doing about it? Some fellow eskaters have pointed me toward the Radium Performance® SR125 Wheels V2 (Radium Core) as a stronger alternative — I haven’t tested or verified that claim myself, so take it as secondhand, not a review.
By the time I went to order a set, they were sold out. For now, since there isn’t a comparable option in this wheel style, I’m planning to replace mine with another set of MAD MAX wheels.
It’s not a perfect answer, and if the Radium wheels come back in stock, I’ll likely try them and report back here.
Inspect Your Wheels
If you’re running 125mm MAD MAX wheels, I’d make wheel inspection part of your regular maintenance routine, particularly once you’ve accumulated significant mileage.
Look closely at the point where the outer wheel material meets the core, and don’t assume visible separation is cosmetic. In my case, Acedeck advised me that the wheels were no longer safe to use and needed to be replaced.
It’s a quick check that could prevent a problem from becoming a safety issue.
The Range: Better Than Expected
I did a 50km ride and came back with more than half my battery remaining.
To put that in context: I’ve gone out for two separate rides in a single day without worrying about charging between them.
Real-world range depends on your route, your speed, your weight, and how aggressively you ride. But for my style of riding, on my routes, this board has never once left me wondering if I’d make it home.
Things I Wish I’d Known
No Lights
I’ll be direct about this.
Unlike the original N1 which has really nice bright LED lights running down both sides of the board, the N1 Nomad Violet has no lights. None.
No front. No rear. Nothing.
I assumed it did. That’s on me — I should have read the specs more carefully. But it’s a notable omission, especially if you ride at dawn, dusk, or into the evening the way I often do.
I ordered the Acedeck motion-sensor taillight. It brightens automatically when you brake, which is exactly what you want for visibility. It’s a good solution.
But it’s an extra step and an extra cost I wasn’t expecting.
Don’t make the same assumption I did.
No Truck Mounting Plates (400 KM Impressions)
This one surprised me — and it’s worth knowing before you buy.
On the standard N1 Nomad, the trucks bolt into a solid metal mounting plate on the deck. You can see it clearly in the photo below. It’s a small thing visually, but structurally it matters: that plate distributes the stress of the trucks across a wider area of the deck.
The Violet edition doesn’t have one. The trucks bolt directly into the deck material itself.

Is the board still solid? Yes. I haven’t had any issues after 400 kilometres. But this feels like a design change that went the wrong direction. The original setup was more confidence-inspiring, and I think Acedeck should bring the plate back.
If you’re a heavy rider or someone who pushes their equipment hard, this is worth factoring in.
The Charger Port Moved — and the Connector Feels Like a Step Back (400 KM Impressions)
On the standard N1, the charging port sits at the top rear of the board — accessible, protected, and easy to find in low light.
On the Violet, it’s moved to the side of the board, just below the deck edge.

It’s not a dealbreaker, but it’s less intuitive than where it used to be. I’ve found myself fumbling for it a few times in the dark.
The bigger observation: the connector on the charger cable itself is plastic now. On the original Nomad, it was metal. Again — not a functional failure in 400 kilometres of use. But metal to plastic is a downgrade, and it’s the kind of change that makes you wonder about long-term durability under daily use.

These aren’t reasons to walk away from this board. But they’re reasons to go in with your eyes open.
Who This Board Is For (and Who It Isn’t)
This board is for you if:
- You ride for the carve. DKP trucks reward riders who want to feel the road.
- You want exceptional range without going full pneumatic.
- You ride mixed surfaces — pavement, gravel, bike paths — and want wheels that handle all of it comfortably.
- You’re comfortable inspecting your wheels regularly and budgeting for replacement if Acedeck flags a safety issue — not just routine wear.
- You care about how your board looks. (The Violet edition is genuinely beautiful.)
This board probably isn’t the right fit if:
- Most of your riding is high-speed straightaways. You’ll want TKP geometry.
- You ride regularly at night or in low light and don’t want to source your own lighting solution.
- You’re new to DKP trucks and not yet comfortable managing wobble at speed.
- Long-term wheel replacement cost and serviceability are major priorities for you.
That’s the trade-off I keep coming back to with this board. The DKP trucks and the MAD MAX wheels gave me exactly the ride I went looking for — the carve, the connection to the road, the feeling I’d missed since my pneumatic days.
Owning that ride also means owning the maintenance that comes with it: checking wheels, replacing parts, staying honest about what’s wearing out.
That’s not a downside I’m hiding from you. It’s just what it costs to ride like this — and for me, it’s still worth it.
Where This Board Sits in My Progression
Every board in this series taught me something.
The WowGo taught me that electric skateboarding was actually possible for someone like me.
The Ownboard Zeus taught me what belt drive feels like.
The Shaboardz Summit V3 introduced me to DKP trucks for the first time.
The first Nomad taught me that pneumatics change everything about comfort and safety on rough roads.
The N1 Nomad Violet is teaching me that I’m a carver, not a speed guy. But sometimes I’ll crank it anyway — just to feel what’s there. Two thousand kilometres in, I’m still doing that.
👉 From the WowGo to the Acedeck: How Four eBoards Shaped My Ride
Ready to Ride?
If the Nomad Violet is on your shortlist, use my code for a discount on your order.
👉 Use code OBRIENESKATE for a discount on your next Acedeck purchase. 👈
If you’re still figuring out which board matches your riding style, I’ve put together a full guide to the best high-power electric skateboards available right now.
👉 Best High-Power Electric Skateboards
Explore the full Complete O’Brien E-Skate Guide for every tutorial, review, and riding tip in one place.
🔙 Back to the Boards that Shaped Me Hub
SAFETY NOTICE: ELECTRIC SKATEBOARDING CAN BE DANGEROUS IF PROPER PRECAUTIONS ARE NOT TAKEN. ALWAYS WEAR A HELMET AND PROTECTIVE GEAR, CHECK YOUR BOARD BEFORE RIDING, AND FOLLOW ALL LOCAL TRAFFIC AND SAFETY LAWS.
THE INFORMATION PROVIDED IN THIS GUIDE IS BASED ON PERSONAL EXPERIENCE AND GENERAL KNOWLEDGE. EVERY RIDER’S EXPERIENCE AND SKILL LEVEL VARY, AND O’BRIEN ESKATE IS NOT RESPONSIBLE FOR ANY INJURIES OR ACCIDENTS RESULTING FROM YOUR USE OF AN ELECTRIC SKATEBOARD. RIDE RESPONSIBLY AND AT YOUR OWN RISK.
— Written by Mike O’Brien, founder of O’Brien E-Skate, an electric skateboarder with over 10,000 km of real-world riding experience.